DTF by the Square Inch

DTF by the square inch

Direct-to-film printing at your fingertips. Order DTF transfers by the square inch and customize apparel, accessories, and home goods with vibrant, durable designs. Perfect for small batches, prototypes, or full production runs. High-quality color reproduction and wash-resistant results on cotton, blends, and specialty fabrics. Ideal for designers, small businesses, and creative entrepreneurs who demand flexibility without minimum order commitments.

Application Instructions

• Preheat: Press the garment for 3–5 seconds to remove moisture before applying the transfer.
• Cotton & cotton-rich blends (60%+): 320°F (152°C) | firm pressure | 15–20 seconds
• Polyester & synthetic blends: 275–285°F (135–141°C) | medium pressure | 15–20 seconds — lower temp prevents dye migration
• Tri-blends & performance fabrics: 275°F (135°C) | medium pressure | 12–15 seconds — test on a swatch first
• Cure time: Allow 24 hours before washing for the adhesive to fully bond to the fabric fibers.
• Cold peel vs. hot peel: Let the transfer cool completely before peeling the film for best edge adhesion.

Care & Longevity

• Wash inside-out in cold water (≤ 86°F / 30°C) to protect print surfaces.
• Use a gentle or delicate cycle — agitation is the primary cause of edge lifting.
• Tumble dry low or air dry — high heat accelerates adhesive wear over time.
• Do not iron directly on the print. Iron around or over a pressing cloth.
• Industrial / commercial washing machines: High-temp and high-agitation cycles will significantly shorten transfer life and are not recommended.
• Dry cleaning: Not recommended — solvents can break down the adhesive layer.

Properly applied and cared-for DTF transfers are designed to withstand regular home laundering. Results depend on correct application settings, fabric type, and care practices — always test on your specific material before production runs.